weephee Posted February 7, 2007 Report Share Posted February 7, 2007 Hello Gentlemen. I'm doing some major work to my car and I'm in need of a torque wrench. I've being looking on ebay for one but there are a lot of different types to choice from. Need something that measures in the 100 to 150 ft lbs range. Question is, do any of you handy men have a torque wrench and if so what would you recommend. This is something I will likely use a fair amount so I want one that is accurate and has some life in it. Thanks Link to comment Share on other sites More sharing options...
BodybyFisher Posted February 7, 2007 Report Share Posted February 7, 2007 I have three, they are the CLICK type, if I were you I would get one in the 25 to 150-200 range. I had to buy a second torque wrench because the first one I bought ranged from 10 to 100 and when I started working on my Deville I needed 150+. I am using Craftsman torque wrenches and the quality is good to me.. I bought a cheapo inch pound torque wrench from harbor freight. Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
Paul_tunney@hotmail.com Posted February 7, 2007 Report Share Posted February 7, 2007 i dont think i would buy one off ebay, they are pretty sensitive machines. just droping one 1/2 foot can nock it out, we have to test ours at work weekly and u would be surpirzed how much they can be out Link to comment Share on other sites More sharing options...
BodybyFisher Posted February 7, 2007 Report Share Posted February 7, 2007 i dont think i would buy one off ebay, they are pretty sensitive machines. just droping one 1/2 foot can nock it out, we have to test ours at work weekly and u would be surpirzed how much they can be out Where do you send yours to re-calibrate? I would love to check mine for accuracy..If I ever did a time-sert job you can be sure I would check mine... Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
Ranger Posted February 7, 2007 Report Share Posted February 7, 2007 I would definitely get a micrometer click type, but if I where you, I'd go for the 250 ft/lb range. Better to have the range and not need it than vice versa. I have had mine for at least 40 years. Just bought an in/lb wrench a few years ago as more and more fasteners seem to require it. Link to comment Share on other sites More sharing options...
adallak Posted February 7, 2007 Report Share Posted February 7, 2007 i dont think i would buy one off ebay, they are pretty sensitive machines. just droping one 1/2 foot can nock it out, we have to test ours at work weekly and u would be surpirzed how much they can be out Where do you send yours to re-calibrate? I would love to check mine for accuracy..If I ever did a time-sert job you can be sure I would check mine... I heard once that life of ancient Egiptians was actually a preparation for the life to come... The life of Northstar owners seems to be a preparation for post-headgasket life. The saddest thing in life is wasted talent Link to comment Share on other sites More sharing options...
BodybyFisher Posted February 7, 2007 Report Share Posted February 7, 2007 I was never a Boy Scout but I am always preparing Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
adallak Posted February 7, 2007 Report Share Posted February 7, 2007 I was never a Boy Scout but I am always preparing Then you must be an ancient Egiptian. The saddest thing in life is wasted talent Link to comment Share on other sites More sharing options...
GreenMachine Posted February 7, 2007 Report Share Posted February 7, 2007 I returned my torque wrench to sears after using it, needed it for my transmission fluid change. THe reason I returned it is because when I went to wipe it clean, the chrome lettering on the black part of the handle (which told you the scale) came right off easily. It was the micrometer clip type. I've been looking for a few good ones to get for replacement, there are some with numbers in a bubble that I've thought about. Another thing about the Sears one that bothered me is that the aren't "guaranteed for life" like every other hand tool. Wish I could afford a Snap-On Anyone have an experiance with this: http://www.sears.com/sr/javasr/product.do?...L&ihtoken=1 The Green's Machines 1998 Deville - high mileage, keeps on going, custom cat-back exhaust 2003 Seville - stock low mileage goodness! 2004 Grand Prix GTP CompG - Smaller supercharger pulley, Ported Exhaust Manifolds, Dyno tune, etc 1998 Firebird Formula - 408 LQ9 Stroker motor swap and all sorts of go fast stuff Link to comment Share on other sites More sharing options...
Kelly92eldo Posted February 8, 2007 Report Share Posted February 8, 2007 I bought a snapon clicker at a garge sale many years ago i wonder if snapon could calibrate mine? also my marine tech saw a snapon digital one on orange county choppers and had to have one, but he says he gets into positions on boats where he cant read the readout Kelly Link to comment Share on other sites More sharing options...
weephee Posted February 8, 2007 Author Report Share Posted February 8, 2007 Thanks guys for the info. Now that I know how sensitive they are, I'll fork out the money and get a new one. Thanks again for the advice. Link to comment Share on other sites More sharing options...
Paul_tunney@hotmail.com Posted February 8, 2007 Report Share Posted February 8, 2007 we have a machine that tests then at work, then when they are out we send them to get repaired, cant remeber the name of the place but i will find out tomorow Link to comment Share on other sites More sharing options...
RDWRIOR Posted February 8, 2007 Report Share Posted February 8, 2007 weephee, If you are in a "spendy" mood ($468.00 list price), and want what seems (to me, anyway) to be the very best torque wrench available, then consider this one from Snap-on: www.torqueinlesstime.com What I really like about this wrench is that it combines the torque and angle features in one tool, along with the simplicity of digital controls. Good luck! Link to comment Share on other sites More sharing options...
coolnesss Posted February 8, 2007 Report Share Posted February 8, 2007 weephee, If you are in a "spendy" mood ($468.00 list price), and want what seems (to me, anyway) to be the very best torque wrench available, then consider this one from Snap-on: Good luck! Okay, do I get a plane ticket to Acapulco, or get a torque wrench? What a 21st Century dilemna . . . Link to comment Share on other sites More sharing options...
jackc Posted February 8, 2007 Report Share Posted February 8, 2007 Anyone have an experiance with this: http://www.sears.com/sr/javasr/product.do?...L&ihtoken=1 I have one. I've been using it for about 2 years. Seems to work fine, and is durable. Great for working in tight areas. Link to comment Share on other sites More sharing options...
med Posted February 8, 2007 Report Share Posted February 8, 2007 Just a suggestion. I did this when I bought my tools. I went to my favorite garage and asked for the names of the sales guys who sell the tools. I lucked out after calling them and a Matco and SnapOn guy drove their trucks out to my place and sold me. I have bought used tools and brand new tools from these guys. If you can't afford it, they'll tell you what they have for lower prices and back the tool up. Ask about periodic factory recalibration, warranty, etc. There was no pressure and I've had no regrets. My first set I bought was brand new (somebody couldn't afford the payments) and I got a starter set at a nice price. As long as these tools are cared for and/or factory refurbished they'll last you a lifetime. These guys want to sell you a quality product and they'll deal with you, because you want a tool and they sell tools. Good luck - hope you get your vacation and the tool of your dreams! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.