rockfangd Posted January 25, 2018 Report Share Posted January 25, 2018 Hi All. I want to put new front struts in my 97 D'elegance this year but have a issue. I have new struts, springs, bellows, bumpers, mounts, and bearings. But I cannot find the rubber at the base of the spring. I want to assemble the new struts so I can just install them in the spring. Anyone have any experience here with this? IIRC I need the upper spring seat and insulator. Believe I have the lowers I may have asked before but am still stuck. Thanks all GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
barczy01 Posted January 25, 2018 Report Share Posted January 25, 2018 I usually get a whole quick strut complete Link to comment Share on other sites More sharing options...
rockfangd Posted January 26, 2018 Author Report Share Posted January 26, 2018 There is one for them? I was not able to find them. It is not for magnaride either. I did get Arnotts though. typically I would go with the KYB quick struts or monroe if kyb is not a option but I could not find either. GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
Dan Posted February 1, 2018 Report Share Posted February 1, 2018 Is this it? http://www.rockauto.com/en/moreinfo.php?pk=1798502&cc=1025345&jsn=420 Link to comment Share on other sites More sharing options...
rockfangd Posted February 2, 2018 Author Report Share Posted February 2, 2018 no. I have those. That is the bellow and bumper. thanks for the response GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
rockfangd Posted April 23, 2019 Author Report Share Posted April 23, 2019 Hi all. I finally have success with this. I hope that my struts are still good. Everything has just been sitting in boxes waiting for me to do the install. I pulled the donor parts off at my local pick and pull. For the record I could not find these listed anywhere A little surface rust but otherwise in excellent condition. I did not need the bellows but I grabbed them anyway GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
BodybyFisher Posted April 24, 2019 Report Share Posted April 24, 2019 Nice, I am surprised the insulators are not available, I got them for my 96 about 10 years ago, it was a dealer part. but, that was 10 years ago Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.