Deville02 Posted November 2, 2010 Report Share Posted November 2, 2010 Hello, I was removing my air filiter to clean it and I pulled the beige (iat sensor?) wire out of the maf plug so I Striped a wire approx the same guage and fit it back into the maf plug, which I am almost sure its not a good connection if any. Am I safe for now or should I have it replacesd by Cadillac? Thank you all Brad Link to comment Share on other sites More sharing options...
BodybyFisher Posted November 2, 2010 Report Share Posted November 2, 2010 Why go to cadillac? Replace it yourself, take a photo and post it so we know what you are talking about Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
rockfangd Posted November 3, 2010 Report Share Posted November 3, 2010 Why go to cadillac? Replace it yourself, take a photo and post it so we know what you are talking about If you did what I think you did you forgot to unplug the IAT before you pulled up on the airbox. I would find a salvage yard and get the plug you need with some wire for slack and solder and heat shrink it together. Is it throwing any codes or running funny. Not a difficult fix if it is done right It will last GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.