JimD Posted March 22, 2007 Report Share Posted March 22, 2007 1998 Seville LED Mirrors Replacement mirror GLASS ONLY spec'd. for a 2004 Deville: Left = Electrochromatic, heated, LED turn signal 88892971 Right = Heated, LED turn signal 88892970 The mirror glass snaps out to release the back of the glass from the plastic shafts that connect to the tilt motors. Installing the new glass takes some practice as you must have 3 items in the proper position and then use a good bit of force to snap the plastic pieces together. Do the RH mirror first; it was easier. I snapped them together by placing the mirror housing, glass side down, on top of a towel on top of a piece of 1 X 4 cut to support the glass. Then bang down hard on the opposite side of the mirror housing with the meaty end of your fist. Tap into the turn signal wires buried under the RF door sill. BOTH left and right turn wires are in this wire bundle; right = dark blue and left = light blue. I'm leaving out a lot of details dealing with removing door panels and snaking wires out to the mirrors. The reasoning is anyone undertaking this project would not be intimidated by removing whatever parts need to be removed and or modified to attach a few wires. Picture here http://caddyinfo.ipbhost.com/index.php?showtopic=13101 Jim Drive your car. Use your cell phone. CHOOSE ONE ! Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.