Jump to content
CaddyInfo Cadillac Forum

Belt Walkin on me


msb113

Recommended Posts

Hi again all,

91 Seville... My belt seems to be walking on me, right over the alternator pulley... replaced the tensioner pully did not fix it... had changed the idler pulley 3 months ago so took it back and they replaced it no questions asked and have a lifetime alternator so took that in and they replaced it...

Now I have not yet installed the idler pulley nor the alternator due to lack of time but will do so late tomorrow... If this belt still walks what are the chances it is the tensioner arm with 119,000 miles?

And what else might it be... the crankshaft looks inline, so does the steering, air conditioner and water pump pulleys... by the way at idle it is fine but if i bring the engine up it starts to walk.

Any input or opinions would be just great :)

Thanks all

Mark

Link to comment
Share on other sites


Yes sir it is... and it is the second in as many days.... once the first one shredded i thought maybe just because it was old but thought to keep an eye on the new one. :)

Thanks,

Mark

Strange but true......I have seen a bad belt cause PO300s codes...

Link to comment
Share on other sites

Hey Mark;

In my other post, I was asking if you can pull codes on the 1991 Eldo...since the car is basically the same as the Seville. Can it be done?

Charles

The OFF & Warmer buttons together should pull your codes... turn the key on but dont start the car hit the Off and Warmer buttons together and you should be good.

Mark

Link to comment
Share on other sites

This is from a 91 diagnostic description

post-2998-1159323403.jpg

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...