Jump to content
CaddyInfo Cadillac Forum

2000 Northstar Question...


chazglenn3

Recommended Posts

Did Cadillac make any improvements on the head gasket issues with the 2000 model year redesign? I don't seem to see as many occurances of failed head gaskets on these. Maybe they are just still too new...

Charles

Charles

Link to comment
Share on other sites


Charles, I don't know that answer for sure, but I do know that the timesert kit for the year 2000 is different....here is the wording from the timesert site:

NorthStar 2000

M11x1.5 Headbolt

This block is similar to the 4.0/4.6 but has two depths for the headbolts 32mm upper bank and 51mm lower bank.

See the link:

http://www.timesert.com/html/gm.html

Note that the kit changed in 2004 also when the bolt was changed to M11x 2.0 Headbolt

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

Gitten aweful personal there Charles mentioning that name :lol: :lol: are you implying we aren't good enough :(:lol:

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

Of course not!!! I know that there is a WEALTH of information here! I just recall from being here before that he pretty much knew the N* inside and out. Did something happen that I am unaware of?? (I can't believe that I spelled Cadillac wrong before...yes, I have been away too long :D )

Charles

Charles

Link to comment
Share on other sites

We will never replace him but each of us has a piece of his legacy, en mass, we combine bits and pieces of his posts. When I listen to the old timers here, they play him back verbatim. Don't get me wrong, we miss him, especially for the type of question that you asked. He was a source of incredible knowledge on the NS. Everytime I find his posts I put the information in a bbob word doc. If he ever comes back again, you can be sure that I will do a LOT of cutting and posting of his posts, this happened on the OLD OLD board also. Its funny to think that this is a third generation caddyinfo board...

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

Hey Larry, thanks for the reply...is BBob the Caddillac Engineer no longer posting on the Caddillac forums? Thank you too BodybyFisher!

Charles

Yea, unfortunately as BBF said, he is gone (not by choice) but not forgotten and deeply missed. I think I have seen him on cadillacforums under another name but only very, very occasionally.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...