Jump to content
CaddyInfo Cadillac Forum

wheel question


hambone

Recommended Posts


The car jack bolt remover in the trunk has a small flattened surface on the end to use to remove caps by slipping it in between the cap and rim. Otherwise, just use a small regular screwdriver but be careful because you can gash/scratch the chrome or painted rims. If you can find something plastic to use that would help elevate the possibility of damaging the rims.

Link to comment
Share on other sites

1994 cadillac eldorado dumb question. how do you remove athe wheel cover on the stock rims? there is no slot to pry it off.

If you are talking about the round disk, if you look closely you might see a slot, but if not, just shove a thin blade screwdriver in there and pry it out.

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

There are slots where a thin blade screw driver will go in and you can pop the center cap out. I have taken my wheels off a hundred times and it is not a big deal.

Kent

Link to comment
Share on other sites

I used a small flexible bladed putty knife to get mine started. Once I opened up the crack a bit, I'd pop 'em off with a standard screwdriver.

photo-36.jpg

Happiness is owning a Cadillac with no codes.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...