BugsyC Posted February 26, 2019 Report Share Posted February 26, 2019 I brought my car in to have the turn signal switch replaced..Is the theft deterent wires on that switch? I have those wires jumped with a resistor.Will that affect the new switch?? Link to comment Share on other sites More sharing options...
rockfangd Posted February 27, 2019 Report Share Posted February 27, 2019 I am pretty sure not. I was going to ask if you had already done that GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
BugsyC Posted February 27, 2019 Author Report Share Posted February 27, 2019 The project is complete..I brought it in to a shop and paid some else to do it for me...Much easier.. Link to comment Share on other sites More sharing options...
rockfangd Posted February 28, 2019 Report Share Posted February 28, 2019 I was referring to the pats chip reader in the ignition. GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
BugsyC Posted March 1, 2019 Author Report Share Posted March 1, 2019 I did the resistor by pass fix first thing.When I got the car the "wait 3 minutes" message came up every so often...Funny thing is,when I found the correct wire it had already been "jumped" with a resistor..One end of that wire had a bad connection.I replaced the resistor with a new one..Works good now.. Link to comment Share on other sites More sharing options...
rockfangd Posted March 1, 2019 Report Share Posted March 1, 2019 Probably had a broken leg in the resistor. Enjoy GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.