pose_etc Posted April 17, 2018 Report Share Posted April 17, 2018 Good morning. I currently only have 1 PK3 key for my DTS. I would like to get 1 or 2 new keys for them, but wasn't sure if I can program myself.I've seen the directions about leaving it in 10 minutes 3 times, and such. Is there a DIY method that works on these, or is this a dealer only task?Thanks,Pose Link to comment Share on other sites More sharing options...
Otten33 Posted April 17, 2018 Report Share Posted April 17, 2018 You can do it yourself. Easy! Can I program a duplicate key for this vehicle? Yes, once you have had the new key cut by a Locksmith or other qualified persons use the following instructions. Call Toll Free 877-464-3685 to find a Locksmith in your area. 1. Insert an existing programmed working key into the ignition cylinder. 2. Turn ignition to the ON position for 5 seconds, then back to OFF position. 3. Remove the existing key and within 5 seconds insert new key and turn it to the ON positiion for 5 seconds. 4. Turn key OFF then back to ON. The key is now programmed. Start vehicle to test key. Link to comment Share on other sites More sharing options...
pose_etc Posted April 17, 2018 Author Report Share Posted April 17, 2018 Cool. I'll get a couple cut and see if that works. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.