Russtoy Posted July 28, 2016 Report Share Posted July 28, 2016 Hi I have a power steering issue. I have replaced all the lines rubber and steel, replaced the pump, the reservoir, so I am at a loss... I still lose fluid, I think it is still pushing out the res cap, with the car running I have a nice little stream of fluid rising up under the cap, so I am guessing when the car is running down the road the stream is a lot stronger and pushing past the seal on the cap. Is there some way to change the pressure valve setting? Thanks for your help Link to comment Share on other sites More sharing options...
BodybyFisher Posted July 28, 2016 Report Share Posted July 28, 2016 Has the cap itself been replaced? Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
MAC Posted July 30, 2016 Report Share Posted July 30, 2016 Maybe the reservoir is clogged (screen?) or perhaps the power steering cooler is blocked, which is causing pressure to build up. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.