Jump to content
CaddyInfo Cadillac Forum

anti lock brake light


HT4100

Recommended Posts


When that light illuminated on my '92, it turned out to be a bad speed sensor in the hub and bearing assembly. I couldn't figure it out so I taped over the light. six months later the bearing started to growl. When I changed the hub and bearing assembly, the light went out. You might unplug it at each wheel and run a continuity test to locate the bad one.

Link to comment
Share on other sites

Simultaneously press and hold the OFF and WARMER buttons on the climate control panel and write doen any codes that are posted. When you see .7.0, the system is awaiting further input and you can exit diagnostics by pressing AUTO or turn the key off.

Post back any codes.

Kevin
'93 Fleetwood Brougham
'05 Deville
'04 Deville
2013 Silverado Z71

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...