Vince P Posted November 1, 2012 Report Share Posted November 1, 2012 1994 Seville SLS 189,000 miles re: Fishing a wire through the firewall I am trying to fish a wire from the passanger compartment to the engine area through the firewall. There is no obvious wire grommet, that I can find, to fish a wire through. Does anyone know of an easy way to fish a single 14 gauge wire through the firewall? Vince P Link to comment Share on other sites More sharing options...
BodybyFisher Posted November 1, 2012 Report Share Posted November 1, 2012 Find a clear area, drill a hole, use a rubber grommet and seal it with electrical puddy Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
bigtone Posted November 1, 2012 Report Share Posted November 1, 2012 1994 Seville SLS 189,000 miles re: Fishing a wire through the firewall I am trying to fish a wire from the passanger compartment to the engine area through the firewall. There is no obvious wire grommet, that I can find, to fish a wire through. Does anyone know of an easy way to fish a single 14 gauge wire through the firewall? Vince P I had to run a wire thru the firewall on my 01 Deville for the hood tamper switch for the remote start. I cut a very small slit in the rubber boot surrounding the steering column where it penetrates the firewall, and slid the wire thru there. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.