adaddo Posted October 22, 2004 Report Share Posted October 22, 2004 Just had to share... I've had front end issues, since Day 1. I've replaced bushings, links, etc.. All with no notable improvement... Well, I bit the big one...and bought a GM steering gear assembly (rack) and tie rod ends. ...Just got it back......and No more popping...No more "Clunk" during acceleration or turning. ....Just had to share Chasing those front end probs isnt fun Thx Again Guys...I read alot on here Hope this may help someone else Thx Link to comment Share on other sites More sharing options...
Norton1 Posted October 22, 2004 Report Share Posted October 22, 2004 I had one of those - found that one of the bolts holding the front sway bar was missing. Glad you got yours fixed - Be well Steve Link to comment Share on other sites More sharing options...
adallak Posted October 22, 2004 Report Share Posted October 22, 2004 adaddo, Thanks for sharing and welcome to the board! The saddest thing in life is wasted talent Link to comment Share on other sites More sharing options...
CadiKing Posted October 22, 2004 Report Share Posted October 22, 2004 adaddo, Rae it One to Ten...Difficulty... Did you have a lift or jackstands? How did you determine it was the rack? thanks Link to comment Share on other sites More sharing options...
kcd1184 Posted October 22, 2004 Report Share Posted October 22, 2004 Just curious if stabilizer bar insulators were part of the package? Kent Link to comment Share on other sites More sharing options...
wgt31 Posted October 22, 2004 Report Share Posted October 22, 2004 just curious did you have an issue with the front end getting "lose" under hard acceleration? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.