nelfasues Posted April 12, 2011 Report Share Posted April 12, 2011 The traction control light is on, i replace the crankshaft position Sensor, both, but the traction control ligth stay , somebody can help me with that? Link to comment Share on other sites More sharing options...
JimD Posted April 12, 2011 Report Share Posted April 12, 2011 We need to know the Diagnostic Trouble Code or codes that are triggering the light. Here is how to display your trouble codes: http://www.caddyinfo.com/readingcodes.html It might take some practice before you can comfortably display and make a note of all the codes; be careful and do not completely discharge your battery while you are practicing. The most important codes for your traction control problem are "C" codes and possibly a one or two "P" codes. Jim Drive your car. Use your cell phone. CHOOSE ONE ! Link to comment Share on other sites More sharing options...
PAUL T Posted April 14, 2011 Report Share Posted April 14, 2011 If you can not access the codes, check all the connections at each wheel for dirt and or corrosion. The codes will tell you which wheel the problem may be. Link to comment Share on other sites More sharing options...
rockfangd Posted April 14, 2011 Report Share Posted April 14, 2011 so what i am getting is since you replaced the crank sensor(s) the traction control light is now on? correct me if i am wrong. the only thing that comes to mind is the connection to the abs unit at the front of the subframe, but without codes it is hard to say GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.