Scotty Posted August 2, 2004 Report Share Posted August 2, 2004 I am in the process of ordering the following from ACSource.com 8 ounces of PAG OIL ISO 46 low viscosity (called caddy dealer and they told me ISO 46 was on their shelf and that is what they use) Measuring Cup Nylog BLUE and a Flush Gun http://www.acsource.com/index.asp?PageActi...PROD&ProdID=137 Will the flush gun work OK to purge my system of the OLD oil? I am flushing all the oil out as I am not sure if there is enough oil in the system and or whether or not TOO MUCH is in it, so I thought I would flush ALL the OLD OIL out and install all new OIL in the correct amount. I am replacing the compressor and the accumulator and will put the right amount of oil in those components. Where would I put the remaining oil. Also will I need new O-RINGS for the evaporator? I plan to flush the lines and the evaporator and replace the compressor and accumulator. Anything else need flushing? Can someone confirm my thinking. Any help or tips appreciated. Is 8 ounces of PAG oil enough? Mike Early on sailors navigated by the stars at night and the North star became the symbol for finding ones way home. Once you know where the Northstar is you can point your ship in the right direction to get home. So the star became a symbol for finding ones way home or more symbolically even finding ones path in life. Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.