Jump to content
CaddyInfo Cadillac Forum

3rd brake light


flash

Recommended Posts

can someone tell me how to get into the 3rd brakelight in the rear window to change bulbs on a 98 deville\

Also need to know where i can get stainless steel brake lines to replace my originals with that are getting pretty rusty

thanks

gordon

Link to comment
Share on other sites


The description of how to change the third brake light is on Page 6-35 of your owners manual, if you dont have your manual see it here

https://www.mygmlink.com/pdf/go2content/man...1998deville.pdf

I have a local place that will fabricate steel and stainless brakes lines, but I must cut them flush with the fittings if I cant get them off and bring them in. You need to find a place near you that does this kind of work. The dealer might have replacements I would check there.

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

can someone tell me how to get into the 3rd brakelight in the rear window to change bulbs on a 98 deville

thanks

gordon

It's attached.

Regards,

Warren

EDIT: out typed by Scotty again! :angry::P

High_Mounted_Stop_Lamp_Replacement.doc

Posted Image

There is no means of avoiding the final collapse of a boom brought about by credit expansion. The alternative is only whether the crisis should come sooner as the result of a voluntary abandonment of further credit expansion, or later as a final and total catastrophe of the currency system involved. - Ludwig von Mises

Link to comment
Share on other sites

The description of how to change the third brake light is on Page 6-35 of your owners manual, if you dont have your manual see it here

https://www.mygmlink.com/pdf/go2content/man...1998deville.pdf

I have a local place that will fabricate steel and stainless brakes lines, but I must cut them flush with the fittings if I cant get them off and bring them in. You need to find a place near you that does this kind of work. The dealer might have replacements I would check there.

=========================================================================

i found out the cover slides towards the front of the car then lifts up to expose the light and bulbs the bulbs are 1156 i used the LL bulbs and replaced them both

thanks

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...