cacsmret Posted July 27, 2005 Report Share Posted July 27, 2005 Is there a late model disk brake swap for a '67 Deville? Looking to get rid of the drums. Link to comment Share on other sites More sharing options...
KHE Posted July 27, 2005 Report Share Posted July 27, 2005 I would imagine that the spindles, calipers, etc. from a 1968 Cadillac with front discs would fit. Front discs were an option in '68 and became standard for 1969. I would suspect that the front brake parts from '69-'76 would be very similar if not identical. Kevin '93 Fleetwood Brougham '05 Deville '04 Deville 2013 Silverado Z71 Link to comment Share on other sites More sharing options...
Scotty Posted July 27, 2005 Report Share Posted July 27, 2005 I concur with that, don't forget to replace the proportioning valve...with the one from the disk brake year Link to comment Share on other sites More sharing options...
CaddyChris Posted July 27, 2005 Report Share Posted July 27, 2005 I put a 68 disc break set-up on my 67. It fits right on...but something is still not right because the car would not align properly. Some of the front-end parts must be different. You should def do this...omg the 67 with 4-wheel drums was a disaster waiting to happen...with the discs it is like driving a different car...it actually stops. I got the set-up off ebay a few years ago. Chris Christopher Petro 94 sts 67 coupe de Ville Link to comment Share on other sites More sharing options...
CaddyChris Posted July 27, 2005 Report Share Posted July 27, 2005 I concur with that, don't forget to replace the proportioning valve...with the one from the disk brake year Thats a good point...we put that on there to, it wasn't that bad of a job...havn't had a problem with the brakes and its been a few years. Christopher Petro 94 sts 67 coupe de Ville Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.