Jump to content
CaddyInfo Cadillac Forum

Recommended Posts

Greetings !!!

I have a 2008 DTS and recently my A/C just started to blow warm air (both sides and rear output).  I checked the compressor and it seems to be engaging (on and off) when control is started.  I purchased a can of R-134A refrigerant with gauge set and it shows that system has a present charge.  After looking around I'm seeing many issues which call out either driver side or passenger side climate control issues...none directly pointing in my direction.  Anyone have any clues as to the problem at hand?  I"m not interested (unless it is a last resort) in taking my car into a service facility as LARGE QUANTITIES OF CASH isn't readily available for their taking.   I appreciate any input available...ACE     

Link to comment
Share on other sites


I would start with retrieving all DTC codes, some parts houses will retrieve them for you.  If you have a bad actuator it will show up in the codes, they are electrically controlled in the 2008 I believe and no longer vacuum based.  It is possible that your temp actuator/motor is stuck on hot air.   Check and post all codes here, you will need B codes related to the AC system

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...