SevilleDorado Posted January 23, 2015 Report Share Posted January 23, 2015 While working on the transmission I noticed I have a leaky steel brake line , and the others don't look too healthy. Car has sat awhile. Anyone know if and or where to get pre-bent lines ? Looks like a B* to have to bend all new ones up and run them...... Thanks again Link to comment Share on other sites More sharing options...
KHE Posted January 23, 2015 Report Share Posted January 23, 2015 Here is a place that has pre-bent lines but I didn't see any for 1995 Cadillacs. They can measure your old lines and fab them but it would probably be expensive. https://www.buybrakes.com/classic-tube/ Another option is the copper-nickel brake lines - they will not rust and can be formed easily. Kevin '93 Fleetwood Brougham '05 Deville '04 Deville 2013 Silverado Z71 Link to comment Share on other sites More sharing options...
SevilleDorado Posted January 23, 2015 Author Report Share Posted January 23, 2015 Huh - I have never heard of "copper/nickel" lines. i know I bend up copper lines for the old Indian fuel line setups and then have them nickel plated. I would think copper is too soft for brake lines ?? I am going to have to replace the rear ones for sure. Link to comment Share on other sites More sharing options...
KHE Posted January 23, 2015 Report Share Posted January 23, 2015 Copper by itself would be too soft but the copper/nickel alloy would be stronger/harder. Kevin '93 Fleetwood Brougham '05 Deville '04 Deville 2013 Silverado Z71 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.