DADDYMACK BURNS Posted November 28, 2014 Report Share Posted November 28, 2014 (edited) Can someone tell me how to pull coeds Thank you THEMOOSE680 2002 cad dts Edited November 28, 2014 by THEMOOSE680 Quote Link to comment Share on other sites More sharing options...
Cadillac Jim Posted November 28, 2014 Report Share Posted November 28, 2014 Your owner's manual should have instructions on running your OBD codes. I have the 2002 FSM on DVD but can't locate the procedure for reading codes without a Tech II (the FSM is for techs, who have a Tech II). There is a link to a Caddyinfo page in my signature block, right below the photo of my car's nice smile. An excerpt from that page: DTC display; 1998-2004 Seville and 2000-2005 Devilleby JimDUse the 3 switches located to the right of the Driver Information Center (DIC) to activate and respond to the OBD prompts on the DIC.ON/OFF = YESINFO RESET = NO INFO DOWN or INFO UP = manual toggleIgnition ON, acknowledge any warning messages; press ON/OFF and INFO UP together for 2 to 3 seconds. Everything in front of you lights up for 4 or 5 seconds, then you will see:Display shows "ALL?"Answering YES will display "ALL CODES?"Answering YES will run automatic test sequence and display codes, if any. Systems and codes will scroll faster than I am able to read them and write them; not to worry. There's much more, follow the link. Quote -- Click Here for CaddyInfo page on "How To" Read Your OBD Codes-- Click Here for my personal page to download my OBD code list as an Excel file, plus other Cadillac data -- See my CaddyInfo car blogs: 2011 CTS-V, 1997 ETC Yes, I was Jims_97_ETC before I changed cars. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.