deville92 Posted August 8, 2010 Report Share Posted August 8, 2010 I changed the Door Lock Actuator. and after i changed it i always get the door open message on my dash. does anyone know if i should change the sensor. and where is it?? Link to comment Share on other sites More sharing options...
rockfangd Posted August 9, 2010 Report Share Posted August 9, 2010 did you plug in both plugs on the lock actuator, and in the right holes? That will most definately cause your problem, Which door? GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
deville92 Posted August 9, 2010 Author Report Share Posted August 9, 2010 It was the front passenger door. Link to comment Share on other sites More sharing options...
rockfangd Posted August 10, 2010 Report Share Posted August 10, 2010 ?? meaning what, The problem or the solution? GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
deville92 Posted August 10, 2010 Author Report Share Posted August 10, 2010 the problem. what should i do?? just take a look at it and see if the connections are loose. Link to comment Share on other sites More sharing options...
rockfangd Posted August 11, 2010 Report Share Posted August 11, 2010 yeah. There is a white clip that goes from the actuator to the window regulator and both wires ride that to get to the actuator, check wires there and make sure they are both plugged in tight, I dont think you can reverse them but they are both 2 spade plugs GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.