beledoux Posted June 7, 2010 Report Share Posted June 7, 2010 I have a 95 Seville SLS I pulled the codes up and got the following which of course I dont have a clue what needs to be addressed. If anyone knows what I should be fixing These are the codes P041 Current, S038 C; History P052 P109, I033, I052, S036, S044. No SIR, ACP, and TCS Thank You Barry Link to comment Share on other sites More sharing options...
Ranger Posted June 9, 2010 Report Share Posted June 9, 2010 Please post the definition along with the DTC. http://myweb.accessus.net/~090/dtcobd1.html Link to comment Share on other sites More sharing options...
CarlaValentine Posted June 9, 2010 Report Share Posted June 9, 2010 P041 = No Cam Reference Signal from Ignition Control Module - Could be caused by a loose or bad connection on the Ignition Control Module. There are 4 electrical connectors on it, 2 on either side. Check those out. Perhaps a bad camshaft position sensor could cause this as well, but I'm not sure. S038 = Electronic Level Control Exhaust Valve Short to Ground/Open P052 = PCM Memory Reset P109 = Keep Alive Memory (KAM) Reset/PCM has lost primary battery power I052 = Keep Alive Memory Error These 3 are most likely due to the battery being recently disconnected. I033 = Loss of Supplemental Inflatable Restraint Data S036 = Electronic Level Control Compressor Short to Ground/Open S044 = Lift or Dive Signal Fault I'm not familiar with the ELC system, but I am sure someone else will chime in on that part. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.