jdcastle09 Posted April 4, 2010 Report Share Posted April 4, 2010 Somewhere I read to be sure the thermostat was placed in the correct upward position. Upon looking at the thermostat plate, there is a little hole with a loose plug in the hole, like some kind of air-vent, only on one side of the thermostat . . . Does it matter the thermostat's position when installing ? Quote Link to comment Share on other sites More sharing options...
BodybyFisher Posted April 4, 2010 Report Share Posted April 4, 2010 Somewhere I read to be sure the thermostat was placed in the correct upward position. Upon looking at the thermostat plate, there is a little hole with a loose plug in the hole, like some kind of air-vent, only on one side of the thermostat . . . Does it matter the thermostat's position when installing ? No it does not matter, as long as the LONG tail is placed INTO the housing Quote Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.