jasso_8 Posted June 9, 2009 Report Share Posted June 9, 2009 I HAVE A 1994 ELDOARDO 4.6L NORTHSTAR. I WAS PULLING THESE CODES ORIGINALLY THE CAR WAS STUCK IN 2ND GEAR. P074, P029, WHICH I FOUND OUT WERE SHIFT SOLENOIDS. REPLACED SHIFT SOLENOIDS AND ITS STILL STUCK IN 2ND GEAR. ANY IDEAS? I CLEARED TRANSMISSION CODES AND DROVE AGAIN AND PO29 HISTORY IS SHOWING AGAIN Link to comment Share on other sites More sharing options...
MAC Posted June 9, 2009 Report Share Posted June 9, 2009 Did you make sure everything was put back together correctly, including reconnecting the electrical connections? Link to comment Share on other sites More sharing options...
jasso_8 Posted June 9, 2009 Author Report Share Posted June 9, 2009 Did you make sure everything was put back together correctly, including reconnecting the electrical connections? yes check all electrical connections are good Link to comment Share on other sites More sharing options...
BodybyFisher Posted June 9, 2009 Report Share Posted June 9, 2009 Did you use the new bracket if one was supplied? Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
MAC Posted June 9, 2009 Report Share Posted June 9, 2009 Did you make sure everything was put back together correctly, including reconnecting the electrical connections? yes check all electrical connections are good Maybe bought defective solenoid(s)? Did you buy ACDelco or aftermarket? When you're driving then enter diagnostic mode to see if the P029 code is "CURRENT". Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.