Jump to content
CaddyInfo Cadillac Forum

Attaching OBD II reader on Deville?


Recommended Posts

Can someone please tell me how to get at the plug in for the OBD II code reader.

I have a 1998 Deville Concours.

The section of panel under the steering wheel pulls down but that's all I can do with it.

After I pull it down do I have to pull or push it to get it off and expose the 16 pin plug in.

All help appreciated.

Thanks very much

Link to comment
Share on other sites


I bought a OBD II code reader and would like to know how to connect it.

I know how to pull codes from dash.

Thanks.

All help appreciated.

There is a plug under the dash typically it has a plastic cover over it, if you get down there and look up you will see it. Pull he cover off. It should not be hard to find and you should not have to remove any covers.

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

  • 2 weeks later...
I bought a OBD II code reader and would like to know how to connect it.

I know how to pull codes from dash.

Thanks.

All help appreciated.

There is a plug under the dash typically it has a plastic cover over it, if you get down there and look up you will see it. Pull he cover off. It should not be hard to find and you should not have to remove any covers.

Thanks I'II check it out.

Appreciated

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...