Jump to content
CaddyInfo Cadillac Forum

R&R 1995 ETC coolant lines


Recommended Posts

Has anyone had the experience of replacing the coolant lines between the engine and the firewall? :(

Where can I get a FSM for the 1995 ETC? or can someone who has done it describe the procedure - PLEASE!



Link to comment
Share on other sites

Those are the heater pipes, I posted a picture if the area in this thread. I noticed the other day that mine was rusted. I should have bought new ones while I had my cross over off to replace the gaskets but that would have been smart...

I included prices of those pipes in that thread also. The hard part is detaching the pipes at the green silicone hoses under the crossover. When I do my cross over gaskets I am going to make sure that my hose clamps are facing in the right direction so that I can get to them in the future.


Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...