kozakvod Posted September 27, 2007 Report Share Posted September 27, 2007 Hey all, Question. My drivers side xenon bulb went out recently. This is the one that has the ignitor attached to the bulb. Anyway, purchase a new on, installed it, it doesn't fire up/light. Just curious if anyone knows if there is a lighting sequence, etc. that I need to go through for that light to actually burn, or is it just a bad bulb or should I check something else? Any help would be appreciated. Thanks, Jeff Link to comment Share on other sites More sharing options...
Bill K Posted September 28, 2007 Report Share Posted September 28, 2007 Try the passenger side bulb and see if it works on the driver side. Could be the new bulb is bad. Link to comment Share on other sites More sharing options...
weephee Posted September 29, 2007 Report Share Posted September 29, 2007 Be very careful not to touch or knock the bulb. Link to comment Share on other sites More sharing options...
Rickster Posted October 9, 2007 Report Share Posted October 9, 2007 Thought I had one out a while back. Looked for a new bulb and near died at the price. Found a blown fuse under the hood. 2001 STS Mettalic Otter Grey, Black Leather, 213,000 kilometers - miles - ? Still running strong! Link to comment Share on other sites More sharing options...
Northstar Posted October 10, 2007 Report Share Posted October 10, 2007 The ballast could be bad. Link to comment Share on other sites More sharing options...
MarkP Posted October 11, 2007 Report Share Posted October 11, 2007 Be very careful not to touch or knock the bulb. Exactly, the oils in your fingers can heat up on the surface of the bulb and cause the bulb to burst. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.