harleyburrow Posted March 4, 2017 Report Share Posted March 4, 2017 can you help me trobleshoot my problem. my dash lights are out my gas guage is out and tempiture, charging and speed guageare not working Link to comment Share on other sites More sharing options...
OldCadTech Posted March 4, 2017 Report Share Posted March 4, 2017 Sure, What vehicle are we talking about? Base or DTS? THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 4, 2017 Author Report Share Posted March 4, 2017 DTS Link to comment Share on other sites More sharing options...
OldCadTech Posted March 6, 2017 Report Share Posted March 6, 2017 Lets start with a module reset. Disconnect BOTH battery cables at the battery and touch both cable ends together. Reconnect the battery and let us know if it made any difference. This will drain any transient voltage and reset the modules. THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 6, 2017 Author Report Share Posted March 6, 2017 OK I did this and the problem is still the same. there is indicator lights across the top of the inst. pannel like security service engin soon the oil and some others. but it is the speed omidor gas and maybe back lights I am not sure what all elese there might be that does not light up. Link to comment Share on other sites More sharing options...
OldCadTech Posted March 6, 2017 Report Share Posted March 6, 2017 Check all the fuses. Ign 1 fuse especially. There are also fuses under the rear seat cushion, you probably seen the fuse block when you did the battery disconnect. THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
OldCadTech Posted March 6, 2017 Report Share Posted March 6, 2017 Another thing worth mentioning is to make SURE the panel is not dimmed or turned off. THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 6, 2017 Author Report Share Posted March 6, 2017 Ok I checked all of the fuses they looked to be good. My battery is in the front not under the rear seat cushion. I did check the fuses behind the rear seat and noticed one fuse that had no power to it or coming out of it. It is a 30 amp fuse. Let me go back and locate the ign 1 fuse and double check its status. be right back. Link to comment Share on other sites More sharing options...
harleyburrow Posted March 6, 2017 Author Report Share Posted March 6, 2017 OK the ING 1 fuse is good and the dimmer pot is not down or dimed Link to comment Share on other sites More sharing options...
harleyburrow Posted March 6, 2017 Author Report Share Posted March 6, 2017 Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 Hold the off and warmer buttons on the climate control panel, you should get a WOW display, you will know it, if and when it happens. If it happens it should light up all segments of the display at once. Let me know if this happens. THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 7, 2017 Author Report Share Posted March 7, 2017 yes they do but the speed ometer and fuel segments still did not light up Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 Hmmm, research time...... I'll have to dig a little deeper. THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 7, 2017 Author Report Share Posted March 7, 2017 OK thank you Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 Did you notice if it went into diagnostics? Did it display PCM? THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 If so list all the codes it displays not just the PCM THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 7, 2017 Author Report Share Posted March 7, 2017 No did not Link to comment Share on other sites More sharing options...
harleyburrow Posted March 7, 2017 Author Report Share Posted March 7, 2017 no diagnostics no codes Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 Cycle through the display modes and see if anything different happens THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 7, 2017 Author Report Share Posted March 7, 2017 I dont understand what it is you want me to do push what buttons Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 On the left side button panel is there a switch for "information" or "display" ? THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 7, 2017 Author Report Share Posted March 7, 2017 yes Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 push that button it should cycle through different displays every time you press the button, like battery voltage etc... does it display anything? THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
harleyburrow Posted March 7, 2017 Author Report Share Posted March 7, 2017 I will go see hold on Link to comment Share on other sites More sharing options...
OldCadTech Posted March 7, 2017 Report Share Posted March 7, 2017 K... THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.