njeldoradoman Posted March 1, 2011 Report Share Posted March 1, 2011 I am in the process of replacing the power antenna on my 1994 Eldorado. The power antenna also has the remote radio receiver in the trunk. I wish to replace just the antenna section, not the combined antenna - remote receiver assembly. There is a coax that goes between the remote receiver and the antenna. How does the coax remove from the antenna? Does it just pull it out, or is there a special technique. I try pulling on the coax cable near the antenna, and it does not seen to disconnect. I do not want to pull too hard and potentially damage the antenna. Does the coax just simply pull out of the antenna, or is it permanent to the antenna - remote radio receiver assembly? Link to comment Share on other sites More sharing options...
njeldoradoman Posted March 2, 2011 Author Report Share Posted March 2, 2011 Problem solved. I pulled on the coax more aggressively the next day and the coax pulled out of the antenna assembly. Now the remote radio receiver and the antenna are separated and ready for installation. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.