jinxed45 Posted September 25, 2004 Report Share Posted September 25, 2004 Is there a certain fitment for aftermarket mufflers? Or can you just get one and have it welded on? THanks! Link to comment Share on other sites More sharing options...
K2K Posted September 25, 2004 Report Share Posted September 25, 2004 Well, if you're doing it yourself you want something similar in size to the old mufflers, just to be safe, but any self-respecting hot rod/exhaust shop will know what mufflers will fit fine. Link to comment Share on other sites More sharing options...
67coupedeville Posted September 25, 2004 Report Share Posted September 25, 2004 Best thing is this for exhaust info that I've found . Hope this helps. Bruce's STS Muffler Site Spence Link to comment Share on other sites More sharing options...
K2K Posted September 25, 2004 Report Share Posted September 25, 2004 Best thing is this for exhaust info that I've found . Hope this helps. Bruce's STS Muffler Site Spence Agreed Link to comment Share on other sites More sharing options...
eldoman95 Posted September 25, 2004 Report Share Posted September 25, 2004 i have an etc as well. i just put on flowmaster 40 serise mufflers on my caddy and it sounds great. offset in center out. 2.25" or 2.5", if you have a good welder to do it he can put the 2.5s on for you. should take about 2 hours. the muffs are 90 bucks each at a local pep boys. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.