JonnySTS Posted November 17, 2010 Report Share Posted November 17, 2010 Hi Guys. New here. I have a 98 Seville STS. Recently I had to replace my radiator because one of the upper mounting tabs broke off the top of the radiator causing a big hole at the top of the jug. Anyway, I screwed in the top transission cooling line into the radiator I snugged it down tight like you normally would, nut I still have play in the metal line. So I tried tightening it some more and it still moves around. This cant be normal, can it??? Link to comment Share on other sites More sharing options...
CoupeDTS Posted November 17, 2010 Report Share Posted November 17, 2010 Should be tight. Did you put the o-ring in the port before putting the hose in? Are you sure you got it in straight? Just take it out and check the threads, spray it with some lube so it goes in easier and see if you can bottom it out next time. * 1966 Deville Convertible * 2007 Escalade ESV Black on Black * 1996 Fleetwood Brougham Black on Black V4P -Gone* 1983 Coupe Deville Street/Show Lowrider -Gone* 1970 Calais 4dr Hardtop GONE* 2000 Deville DTS - Silver with Black Leather and SE grille GONE* 1999 Seville STS - Pearl Red GONE Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.