tmpafford Posted August 23, 2004 Report Share Posted August 23, 2004 While I had the dash apart this weekend I took the time to look at the broken ash tray door. Every thing seemed to be there but SOMETHING was broken. On the right hand side of the housing I noticed a little cam machanism, but there was nothing to go into it. I popped off the door from the housing and noticed that there was a pin broken off from the door. I took a small drill and drilled through the plastic where the pin used to be so I could push a small flat head nail through the hole. I clipped off the nail so that about 3/16" was showing after being pushed through the plastic. After a little fine tuning with a file (I think I had about 1/8" left showing) it worked as good as new. Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.