lightflood Posted August 7, 2009 Report Share Posted August 7, 2009 My brother has a 95 eldorado with 115k. It died and won't restart. I have codes po56(tansaxl input sensor),p095 and s044. Would it do any good to reset the codes? This is not obd2 so my scan tool can't resetr codes does anyone know how to do it? Would a crank sensor set a code? I would guess so. I also wouldn't guess the p056 would cause it not to run but I'm not sure. Car cranks but no fire. Any help appreciated. Is there a way to monitor the sensors like a scan tool does? I'd like to see if I have fuel pressure Link to comment Share on other sites More sharing options...
Ranger Posted August 7, 2009 Report Share Posted August 7, 2009 http://myweb.accessus.net/~090/dtcobd1.html Link to comment Share on other sites More sharing options...
lightflood Posted August 8, 2009 Author Report Share Posted August 8, 2009 I poured a little fuel in intake and it ran briefly so I'm going to look into fuel pressure regulator. Link to comment Share on other sites More sharing options...
Ranger Posted August 9, 2009 Report Share Posted August 9, 2009 Wait a minute. That sounds more like a bad fuel pump. Get a fuel pressure gauge on it and see what your pressure is (if you have any). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.