kentuckynet Posted January 1, 2009 Report Share Posted January 1, 2009 03 cts, v6...only error code P2500H When you turn the key to start it takes about 5-8 seconds before it starts, i was told pushing on the accelerator doesnt do anything but if you dont push on the accelerator while trying to start it ....it will not start. I changed the fuel filter (seemed to help on the first start) but on the next start back the same. I have turned the key on and waited for the fuel pump to build up pressure and then start but that makes no difference either. Is it my fuel pump? If so do you have to pull the tank? Thanks as always for the GREAT help i have gotton here! Kentucky Link to comment Share on other sites More sharing options...
Ranger Posted January 2, 2009 Report Share Posted January 2, 2009 Is it my fuel pump? Very possible, but the only way to tell is to gut a fuel pressure gauge on it. I don't know anything about the CTS so I don't know if there is an access panel or you have to drop the tank. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.