Jump to content
CaddyInfo Cadillac Forum

Thanks Y'all


Turbinite

Recommended Posts

I just finished repairing my 2000 SLS with bad wheel hub bearings. I read through the posts trying to figure out what the noise was coming from the front end. (Rather difficult to tell) I first thought it was the transmission and after reading all the info posted decided to try and replace the hub. I replaced the driver side first thinking that when you turn an S to the right it went away. Well it was'nt the driver side, so decided to change the passenger side before taking it to the shop. Lo and behold the noise is gone. So to all you mechanics and backyarders that know what you are talking about. Thanks a lot!!!

Link to comment
Share on other sites


When you turn right, you load the left bearing and unload the right. Thus when it gets quieter on a right turn and louder on a left, it is the right bearing that is ailing.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...