chance_b Posted February 7, 2006 Report Share Posted February 7, 2006 i was planning on drilling out all holes 1st, but after thinking about it, i won't be able to bolt the fixture plate down for the last holes on each side of the block. do i have to do each insert, completely, as i go? thanks, Link to comment Share on other sites More sharing options...
jhall Posted February 8, 2006 Report Share Posted February 8, 2006 Yep, Drill each hole, tap it and install the Timesert insert then move to the next hole. You need the fixture plate in place to guide the drill so the hole will stay centered. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.