Elin1993 Posted June 29, 2022 Report Share Posted June 29, 2022 After replacing the steering wheel related parts and sensors,in the event of a related failure, you need to perform calibration.So here I will show you the guide on how to use launch x431 to calibrate steering angle sensor for Cadillac XTS 2013.For more repair case about Cadillac,please check here:Cadillac Trouble Repair What You Need? Launch X431 V+ Operation Procedures: 1) Choose SGM software, use “Automatically search”, find “Quick test”,to scan all system inside the car 2) Choose “EPS” 3) Choose “Special function” 4) Find “Center steering wheel angle sensor”, press “Yes” to continue 5) Start engine” to continue 6) Read the prompt”Slowly left, and then slowly to the right, last back to the steering wheel” 7) Function finished. More test report about Launch X431 please check:Launch X431 Test report Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.