ItsAllHype Posted March 5, 2005 Report Share Posted March 5, 2005 I have to replace an injector on my 96STS. Never did this before. Question: Do I have to completely remove the update stainless steel fuel rail in order to replace an injector? If I do, is there a special tool I need to remove the fuel feed and return lines from the fuel rail? I can see that it looks like the metal retainers would flip out and take the pressure off of the lines, but it looks like the line is held inside by some kind of tab that is part of the plastic line. Anyone ever done this job? Link to comment Share on other sites More sharing options...
ItsAllHype Posted March 7, 2005 Author Report Share Posted March 7, 2005 Turns out that I didn't have to disconnect the rail from the feed and return lines to change the injector on #2. You can change any of them without disconnecting from the main lines. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.