Jason15036 Posted January 4, 2005 Report Share Posted January 4, 2005 Can someone give me a detailed description or link so that I will now the steps to change the transmission pump. I 've been reading in the archives. Thank You, Jason Link to comment Share on other sites More sharing options...
Dloch Posted January 4, 2005 Report Share Posted January 4, 2005 1st you'll need to remove the motor and trans from the car. 2nd you'll need to get some shop manuals to do the job. They will explain everything. BTW not to be a smart #@@, how do you know for sure that you need a pump? It could also be the pressure control valve, which is electronic and you would need to do step one to get at it also. Dennis Link to comment Share on other sites More sharing options...
Jason15036 Posted January 5, 2005 Author Report Share Posted January 5, 2005 Becasue I have very low fluid being pumped through, I have an hesitation into reverse and drive and I have a loud whining noise that increases with engine rev. I have had the motor out before so I am famaliar with what to do. I just need to know where the punp is located on the tranny and what it looks like. Link to comment Share on other sites More sharing options...
Scotty Posted January 5, 2005 Report Share Posted January 5, 2005 You have 2 threads going here, I gave you a link to droger03 who recently changed his pump did you contact him and look over those links? I think he dropped the carriage to get to it. Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.