2002 Deville Programming doesn't load

[jleasure0614]

I recently purchased a 2002 Deville Base model. To program, the manual states:

To enter feature programming mode, do the following:
1. Turn the ignition to ON, making sure the vehicle is in
PARK (P).
2. If your vehicle has memory settings, press the
appropriate memory button, 1 or 2, located on
the driver‘s door panel. The DIC display will show
either 1 or 2 depending on which button was
selected. Make sure the number on the DIC display
matches the number on the back of your key fob.
3. Press the INFO button until FEATURE
PROGRAMMING appears on the DIC display.

However, When I cannot get FEATURE PROGRAMMING to display. I've pressed and held INFO, pressed and held INFO/RESET, pressed the arrows on INFO, no avail. Any ideas?

[IceCold]

I recently purchased a 2002 Deville Base model. To program, the manual states:

To enter feature programming mode, do the following:

1. Turn the ignition to ON, making sure the vehicle is in

PARK (P).

2. If your vehicle has memory settings, press the

appropriate memory button, 1 or 2, located on

the driver‘s door panel. The DIC display will show

either 1 or 2 depending on which button was

selected. Make sure the number on the DIC display

matches the number on the back of your key fob.

3. Press the INFO button until FEATURE

PROGRAMMING appears on the DIC display.

However, When I cannot get FEATURE PROGRAMMING to display. I've pressed and held INFO, pressed and held INFO/RESET, pressed the arrows on INFO, no avail. Any ideas?

Good Day,

Press Info up & on/off and your dash will light up after 2 or 3 seconds, then release. Hit on button when it ask you all codes. After it goes through all your codes it will say clear all codes. Hit on, then turn the key off.