atikovi Posted February 19, 2015 Report Share Posted February 19, 2015 I have a C0620 code for the electronic suspension which is the right front position sensor circuit, signal invalid. At the sensor connector I’ve tested for 5V reference voltage and ground and that’s good. I jumped the 5V reference terminal to the signal circuit terminal and the scan tool shows 0 volts. All the other sensors are around 1V. So there is a break in the signal wire between the sensor and the module or the module itself is bad. Where is the module and how do I get to it? Link to comment Share on other sites More sharing options...
atikovi Posted February 19, 2015 Author Report Share Posted February 19, 2015 Never mind, found it in the trunk behind the right side trim panel. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.