Jump to content
CaddyInfo Cadillac Forum

Recommended Posts


....How do you get codes for the 2002, being that there are no more push buttons for climate control?

Here is the procedure for displaying codes on your 2002 Seville;

DTC display; 1998-2004 Seville and 2000-2005 Deville

Use the 3 switches located to the right of the Driver Information Center (DIC) to activate and respond to the OBD prompts on the DIC.

ON/OFF = YES

INFO RESET = NO

INFO DOWN or INFO UP = manual toggle

Ignition ON, acknowledge any warning messages; press ON/OFF and INFO UP together for 2 to 3 seconds. Everything in front of you lights up for 4 or 5 seconds, then you will see:

Display shows "ALL?"

Answering YES will display "ALL CODES?"

Answering YES will run automatic test sequence and display codes, if any. Systems and codes will scroll faster than I am able to read them and write them; not to worry.

"ALL CLEAR CODES?" will display at the end of the automatic test. If you are satisfied you have the information you need, answer YES

to clear/erase all error codes.

Answering "ALL?" with INFO DOWN will toggle systems test manually in order.

Answering "ALL?" with INFO UP will toggle system test manually in reverse order.

Press INFO RESET to reset DIC to "ALL?" to start again.

Ignition OFF to exit.

SYSTEMS: (as of 1998)

ABS (Antilock Brake System)

AMP (Amplifier)

DDM (Door Driver Module)

DIM (Dash Integration Module)

IPC (Instrument Panel Cluster)

IPM (Instrument Panel Module)

IRC (Integrated Radio Module)

PCM (Powertrain Control Module)

RFA (Remote Function Actuation)

RIM (Rear Integration Module)

SDM (Sensing and Diagnostic Module) Includes airbag crash data. Under RF seat of Seville.

VTD (Vehicle Theft Deterrent)

MSM (Memory Seat Module)

TTM (Tilt/Telescoping Module)

RSS (Road Sensing Suspension)

last edited 12/27/04 jwd

Jim

Drive your car.

Use your cell phone.

CHOOSE ONE !

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...