draddor Posted December 27, 2010 Report Share Posted December 27, 2010 (edited) Hello, I have a 1995 Eldorado with a bad heater cote and I need alittle help on replacing it. I removed the glove box and disconnected the air bag. I get lost at this point. I was wondering if anyone had step by steps with pictures. Thanks in advance! Edited December 27, 2010 by rgibbons Quote Link to comment Share on other sites More sharing options...
steveo412 Posted January 3, 2011 Report Share Posted January 3, 2011 hey hows it going,you probly figered it out,1# 6 screws to the glove box 2# unbolt your bottom panel 3 screws 3# disconect your air line to the canister 4# unbolt the canister 2 screws 5# with canister lose wiggle out the rod on top,thay push right back when u put it together 6#pull canister threw the bottom and set it side,[note it doesnt have to come completly out],7# unbolt your pcm with 10 mil,and very carefull with as u pull it threw the bottom,now theres room to get your heatercore out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.