Jump to content
CaddyInfo Cadillac Forum

Change brake pads message


Recommended Posts


The "change brake pads" warning is still on after mechanic replaced all pads on all wheels. How do I get it to reset?

There is no way to "reset" the CHANGE BRAKE PADS message. The recommended method of eliminating this message is to replace the affected brake pads and the brake pad wear sensor that triggered the message.

Your brake pads might have been changed (as you say) but the sensors were neglected. It's possible (likely?) your "mechanic" was not experienced with your year/model Cadillac brake system.

Take the car back to that shop and point out the error of their methods.

Jim

Drive your car.

Use your cell phone.

CHOOSE ONE !

Link to comment
Share on other sites

The "change brake pads" warning is still on after mechanic replaced all pads on all wheels. How do I get it to reset?

There is no way to "reset" the CHANGE BRAKE PADS message. The recommended method of eliminating this message is to replace the affected brake pads and the brake pad wear sensor that triggered the message.

Your brake pads might have been changed (as you say) but the sensors were neglected. It's possible (likely?) your "mechanic" was not experienced with your year/model Cadillac brake system.

Take the car back to that shop and point out the error of their methods.

Is there a simple way to determine which wheel is the problem?

Link to comment
Share on other sites

The "change brake pads" warning is still on after mechanic replaced all pads on all wheels. How do I get it to reset?

There is no way to "reset" the CHANGE BRAKE PADS message. The recommended method of eliminating this message is to replace the affected brake pads and the brake pad wear sensor that triggered the message.

Your brake pads might have been changed (as you say) but the sensors were neglected. It's possible (likely?) your "mechanic" was not experienced with your year/model Cadillac brake system.

Take the car back to that shop and point out the error of their methods.

Is there a simple way to determine which wheel is the problem?

No. Not after the fact of brake pad replacemet.

The systematic/methodical procedure is to inspect each and every brake pad wear sensor visually and test for continuity with an Ohmmeter. Which means removing all four wheels.

Jim

Drive your car.

Use your cell phone.

CHOOSE ONE !

Link to comment
Share on other sites

The "change brake pads" warning is still on after mechanic replaced all pads on all wheels. How do I get it to reset?

There is no way to "reset" the CHANGE BRAKE PADS message. The recommended method of eliminating this message is to replace the affected brake pads and the brake pad wear sensor that triggered the message.

Your brake pads might have been changed (as you say) but the sensors were neglected. It's possible (likely?) your "mechanic" was not experienced with your year/model Cadillac brake system.

Take the car back to that shop and point out the error of their methods.

Is there a simple way to determine which wheel is the problem?

No. Not after the fact of brake pad replacemet.

The systematic/methodical procedure is to inspect each and every brake pad wear sensor visually and test for continuity with an Ohmmeter. Which means removing all four wheels.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...