lacseville Posted June 15, 2004 Report Share Posted June 15, 2004 when i took the motor out, the manual said to mark the flywheel in relationship to the torque converter... why is that? do the 3 bolts only line up with the holes on the TC at that position? they look like they'd line up in any place. thanks i put the motor in today, and i'm starting to put the mounts on and bolt the engien back up the transaxle.... it won't be long now!!! Link to comment Share on other sites More sharing options...
bigfoo Posted June 15, 2004 Report Share Posted June 15, 2004 They say that because the flywheel and the converter are 'usually' balanced together and if you bolt it back up in another position it will be out of balance. So just mark it White out works great for marking things Link to comment Share on other sites More sharing options...
lacseville Posted June 15, 2004 Author Report Share Posted June 15, 2004 thanks! I marked it when I took the motor out... i just got the new motor back in and am about to go out right now and bolt the TC up to the flywheel! Thanks bro btw... purple spray paint works too! Link to comment Share on other sites More sharing options...
bigfoo Posted June 15, 2004 Report Share Posted June 15, 2004 Not a problem.. Good luck putting it back together..... You are a brave man taking the engine out of a caddy Lots and lots and lots and LOTS of things to hook up hehehe. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.