Ed Fenwick Posted November 14, 2005 Report Share Posted November 14, 2005 Aloha, My bookl says to tighten the trans. pan bolts to 156 inch pounds! Is an inch pound 1/12 of a foot pound, or is there some other factor? So 13 ft pounds? That must be just good and snug. Tks Ed Link to comment Share on other sites More sharing options...
Ranger Posted November 14, 2005 Report Share Posted November 14, 2005 Yes, if I am not mistaken 12 in/lbs = 1 ft/lb. Link to comment Share on other sites More sharing options...
jhall Posted November 14, 2005 Report Share Posted November 14, 2005 That's correct - 13 lb/ft is not much (That's read as 13 pounds force over a 1 foot distance leverage arm.) You've got to pull the gasket home so it won't leak after a lots of thermal cycles. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.