mike33 Posted July 1, 2005 Report Share Posted July 1, 2005 Folks, anybody know how to pull codes on a 2002 Deville DHS? I tried the passenger off and warmer buttons, that doesn't work. Thanks in advance! Link to comment Share on other sites More sharing options...
Dadillac Posted July 1, 2005 Report Share Posted July 1, 2005 Info up and on buttons simultaneously. Don "Modern warriors saddle iron horses of chrome." Link to comment Share on other sites More sharing options...
mike33 Posted July 2, 2005 Author Report Share Posted July 2, 2005 Thanks Don. These are my two codes: IPC U1016 History PDM U1713 History Anybody know what they are? Again 2002 Deville DHS. Tks! Link to comment Share on other sites More sharing options...
Dadillac Posted July 2, 2005 Report Share Posted July 2, 2005 IPC U1016 = Loss of communication with PCM PDM U1713 = Loss of front door module to window motor high speed comm. Since these codes are history, just clear them, and forget them. After clearing, I usually will check back the codes, a few days later. Just to make sure that they do not reappear. Don "Modern warriors saddle iron horses of chrome." Link to comment Share on other sites More sharing options...
mike33 Posted July 3, 2005 Author Report Share Posted July 3, 2005 Thanks Again, one more question. When a code says "HISTORY", how old was the event? One year, one month, one day, so many ignition cycles?? I forgot. Tks. Link to comment Share on other sites More sharing options...
Ranger Posted July 3, 2005 Report Share Posted July 3, 2005 After three ignition cycles without a fault detected, the code goes to history. After 50 ignition cycles without the fault being detected it gets cleared. So it is somewhere between 3 & 50 ignition cycles. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.