adaddo Posted April 18, 2005 Report Share Posted April 18, 2005 Hey guys ... Hopin for a bit of advice/confirmation that a transmission from a 97 etc (vin 9 ) Will fit and function properly in my 96 sts (vin 9 ) ? Both are Northstar 4.6's Are there any factors to consider....such as the spline where the axles come out of the transmission, etc...? Any help from a seasoned caddy guy would be greatly appreciated Any helpful tips as well... Thx again Adaddo Link to comment Share on other sites More sharing options...
addison_ii Posted April 19, 2005 Report Share Posted April 19, 2005 Since they are both vin 9 transmissions,(torque converter clutches) you shouldn't have a problem. Final drive ratio, I think are the same on both(3.71:1) so no computer compatibility nightmares there. However since I am a rookie I would wait for the more experienced residents to chime in. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.