Jason15036 Posted March 16, 2005 Report Share Posted March 16, 2005 I had just had my cv joints replaced on both sides, and shortly after I was getting traction disabled and abs light on with code t023, THe code has something to do with the sensor on the right front wheel. My question is the cv joint nut was not tight on the hub and when I looked at it for inspection, and I had drove around like this for a while until I noticed. I tighted it up and I still have the same problem, so do you think the sensor could have gotten damaged from me driving on it with the nut loose. The problem at first was intermediate and now its all the time. I think the sensor is damaged. Link to comment Share on other sites More sharing options...
Ranger Posted March 16, 2005 Report Share Posted March 16, 2005 T023 is a sensor continuity fault. Sensor is shot. The only way to fix it is to replace the hub & bearing assembly again. I would suspect it is from driving with the hub nut loose. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.