Bradd Posted January 26, 2018 Report Share Posted January 26, 2018 In my 2002 Escalade the front air/heat works fine. All the controls work and the temp works great, however the temp for the rear air/heat is always cold no matter where you set the temperature at. The rear blows fine, I can change it from floor to overhead no problem. The fan will blow as it should from low to high but not heat will come out. Are there actuators that could be out, and if so does someone have a picture of which one it would be? Thanks Link to comment Share on other sites More sharing options...
Bradd Posted January 27, 2018 Author Report Share Posted January 27, 2018 Solved by removing the actuator for the heat and manually adjusting it for now Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.